APPENDIX/DIAGNOSTICS
Test Standards
This section contains a list of the test standards cited above.
AAMA 501.1, Standard Test Method for Metal Curtain Walls for Water Penetration Using Dynamic Pressure.
AAMA 501.2, Field Check of Metal Curtain Walls for Water Leakage.
AAMA 501.3, Field Check of Water Penetration through Installed Exterior Windows, Curtain Wails, and Doors
by Uniform Static Air Pressure Difference.
AAMA 502, Voluntary Specification for Field Testing of Windows and Sliding Glass Doors.
ASTM C 236, Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means
of a Guarded Hot Box.
ASTM C 976, Standard Test Method for Thermal Performance of Building Assemblies by Means of a
Calibrated Hot Box.
ASTM C 1046, Standard Practice for In-Situ Measurement of Heat Flux and Temperatures on Building
Envelope Components.
ASTM C 106, Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities
of Wood Frame Buildings.
ASTM E 283, Standard Test Method for Rate of Air Leakage Through Exterior Windows, Curtain Walls, and
Doors.
ASTM E 331, Standard Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by
Uniform Static Air Pressure Difference.
ASTM E 741, Standard Test Method for Determining Air Leakage Rate by Tracer Dilution.
ASTM E 779, Standard Test Method for Determining Air Leakage Rate by Fan Pressurization.
ASTM E 783, Standard Method for Field Measurement of Air Leakage Through Installed Exterior Windows
and Doors.
ASTM E 1105, Standard Test Method for Field Determination of Water Penetration of Installed Exterior
Windows, Curtain Walls and Doors by Uniform or Cyclic Static Air Pressure Difference.
ISO 6781-1983, Thermal Insulation - Qualitative Detection of Thermal Irregularities in Building Envelopes -
Infrared Method.
PAGE D-6
Previous Page
