1 All materials shall be on one set of up to four 30-inch horizontal by 40-inch vertical
p resentation surfaces, mounted on rigid board. There shall be no indication of authorship
on the presentation surfaces. The lead designer-A/E team shall be indicated in a sealed
e n velope attached securely to the back of one of the 30" x 40" boards.
2 No model is requested nor will it be accepted. Photos of study models or computer
simulations may be attached to the surfaces as part of the graphic presentation.
3 The following drawings are mandatory and shall be included on the four surfaces.
If desired, drawings may extend over more than one 30" x 40" surface.
Plans
Illustrative Site Plan at 1:400 Scale, Color Rendered
Floor Plans at 1:200 Scale, Black and White Rendered
Ground Floor, Specifically Indicating the Entry, Lobby, and Security Checkpoint
Typical Floor Plan
Sections
Longitudinal, at 1:200 Scale, Black and White Rendered
Latitudinal, at 1:200 Scale, Black and White Rendered
Elevations
Entry (front) Elevation, at 1:100 Scale, Black and White Rendered
Additional Elevation, at 1:100 Scale, Black and White Rendered
Exterior from St reet Le vel, Color Rendered
Interior (Lobby View Pre f e rable), Color Rendered
98
section 6.8
Previous Page
